These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes
•F18516-0787 features Stack Rack™ interlocking end plates f..
These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes•F18516-0787 features Stack Rack™ interlocking end plates fo..
Perforated baskets made from polyethylene plastic allow rapid filling and draining, and are handy for batch rinsing and transporting labware as well as straining or filtering large particles.
• Chemically resistant; withstand acids and alkalis• Service temperature up to 82°C (180ºF)
• Perforations a..
Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm).
• Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack
• Rack tilts toward the rear for convenient presentation of dishes
• Epoxy coated steel wir..
Keep disposable gloves handy with these welded steel wire racks. Select rack to hold one, two or three boxes of disposable gloves, wipes or tissues.
• Glove box drops into an individual retaining compartment and lifts out easily for replacement• Retaining compartment internal dimensions are 12.7cmW..
Keep disposable gloves handy with these welded steel wire racks. Select rack to hold one, two or three boxes of disposable gloves, wipes or tissues.
• Glove box drops into an individual retaining compartment and lifts out easily for replacement
• Retaining compartment internal dimensions are 12.7cm..
Keep disposable gloves handy with these welded steel wire racks. Select rack to hold one, two or three boxes of disposable gloves, wipes or tissues.
• Glove box drops into an individual retaining compartment and lifts out easily for replacement
• Retaining compartment internal dimensions are 12.7cm..
ProCulture Mini Cryocooler; -15ºCFor 0.5, 1.5, or 2.0ml Tubes, 12 Places, Plastic, 5¹⁵⁄₁₆ x 4¼ x 1¹⁵⁄₁₆ in.This small cooler safely holds twelve 0.5, 1.5 or 2.0ml microcentrifuge tubes or cryogenic vials at a temperature below -15ºC for approximately 1 hour. Ideal for protecting valuable samples sto..
These small, lightweight tongs are ideal for sampling small quantities of material ranging from food to pharmaceuticals.
• Ridged jaws securely hold wet or dry samples
• One piece, sterile tongs are made from polystyrene plastic
• Individually packaged, sterilized by gamma irradiation, lot stamped ..